Troubleshooting guide

15 — As required maintenance tasks
15-38 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
12 Verify that the database backup file set is in the original backup directory on the
primary database station. If it is not, copy the backup file set saved in step 1 to
the original backup directory.
13 Open a console window and navigate to the directory that contains the 5620 SAM
installation software.
14 Enter the following:
# cd Linux ↵
15 Enter the following:
# ./OracleSw_PreInstall.sh ↵
16 The following prompt is displayed:
Please select between the following option:
1) NEW INSTALL, DB RESTORE, OR DB RECONFIGURATION OF 5620 SAM
2) UPGRADE OF 5620 SAM
3) EXIT
Please enter(1,2 or 3):
Enter 1 ↵.
17 The following prompt is displayed:
Enter the Oracle dba group name [default]:
Enter a group name and press ↵.
The following message is displayed:
Creating group group if it does not exist ...
Note — The path to the backup file set must be the same as the initial
path to the file set after backup creation.
Note — The default values displayed by the script are shown as
[default]. To accept a default value, press ↵.
If you specify a value other than the default, you must record the value
for use when the OracleSw_PreInstall.sh script is run during a software
upgrade, or when the Oracle management user information is required
by Alcatel-Lucent technical support.
Note — To reduce the complexity of subsequent software upgrades
and technical support activities, Alcatel-Lucent recommends that you
accept the default for this parameter.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01