Troubleshooting guide

15 — As required maintenance tasks
15-32 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
16 Perform one of the following.
a If you specify a new user in step 15, the following prompt is displayed:
Please assign a password to the UNIX user username ..
New Password:
Perform the following steps.
i Type a password and press ↵. The following prompt is displayed:
Re-enter new Password:
ii Retype the password and press ↵. The following message is displayed if
the password update is successful:
passwd: password successfully changed for username
b If you specify an existing user in step 15, the following prompt is displayed:
Do you want to change the password for the user username?
[Yes/No]:
Type No ↵.
17 The following prompt is displayed:
Specify whether a 5620 SAM server will be installed on this
workstation.
The database memory requirements will be adjusted to account for
the additional load.
Will the database co-exist with a 5620 SAM server on this
workstation [Yes/No]:
Enter Yes or No, as required, and press ↵.
Messages like the following are displayed as the script execution completes:
INFO: About to set kernel parameters in /etc/sysctl.conf...
INFO: Completed setting kernel parameters in /etc/sysctl.conf...
INFO: About to change the current values of the kernel parameters
INFO: Completed changing the current values of the kernel
parameters
INFO: About to set ulimit parameters in
/etc/security/limits.conf...
INFO: Completed setting ulimit parameters in
/etc/security/limits.conf...
INFO: Completed running Oracle Pre-Install Tasks
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01