Troubleshooting guide

15 — As required maintenance tasks
15-30 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
11 Enter the following:
# ./OracleSw_PreInstall.sh ↵
The following prompt is displayed:
Please select between the following option:
1) NEW INSTALL, DB RESTORE, OR DB RECONFIGURATION OF 5620 SAM
2) UPGRADE OF 5620 SAM
3) EXIT
Please enter(1,2 or 3):
Enter 1 ↵.
12 The following prompt is displayed:
Enter the Oracle dba group name [default]:
Enter a group name and press ↵.
The following message is displayed:
Creating group group if it does not exist ...
If you specify a new group, the following message is displayed:
done
13 If you specify an existing group, the following prompt is displayed:
WARNING: Group group already exists locally.
Do you want to use the existing group? [Yes/No]:
Perform one of the following.
a Enter Yes ↵.
b Enter No ↵. Go to step 12.
14 If the default user exists in the specified group, the following prompt is displayed:
Note — The default values displayed by the script are shown as
[default]. To accept a default value, press ↵.
If you specify a value other than the default, you must record the value
for use when the OracleSw_PreInstall.sh script is run during a software
upgrade, or when the Oracle management user information is required
by Alcatel-Lucent technical support.
Note — To reduce the complexity of subsequent software upgrades
and technical support activities, Alcatel-Lucent recommends that you
accept the default for this parameter.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01