Troubleshooting guide

15 — As required maintenance tasks
Alcatel-Lucent 5620 Service Aware Manager 15-21
5620 SAM
System Administrator Guide
3 Select the auxiliary server and click Properties. The Auxiliary Server (Edit) form
opens.
4 Set the Operation Mode parameter to In Maintenance Mode.
5 Click OK to commit the change and close the form.
The auxiliary server stops.
6 Close the System Information form.
15.4 Cflowd auxiliary server operation
The following procedures describe how to operate a Cflowd auxiliary server.
Procedure 15-13 To start a Cflowd auxiliary server
1 Log in to the Cflowd auxiliary server station as the root user.
2 Open a console window.
3 Enter the following to start the server:
# /opt/5620sam/dcp-R_rRn/bin/dcpctl.sh start ↵
where R_rRn is the software release identifier
The server starts, and the following messages are displayed:
Starting 5620 SAM DCP database...
DCP database is started successfully
Starting 5620 SAM DCP server......
5620 SAM DCP server is started successfully
Procedure 15-14 To stop a Cflowd auxiliary server
1 Log in to the Cflowd auxiliary server station as the root user.
2 Open a console window.
3 Enter the following:
# /opt/5620sam/dcp-R_rRn/bin/dcpctl.sh stop ↵
where R_rRn is the software release identifier
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01