Troubleshooting guide

15 — As required maintenance tasks
15-20 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
16 Close the open console windows.
17 Log out of the primary main server station.
15.3 Auxiliary server operation
The following procedures describe how to operate an auxiliary server.
Procedure 15-11 To start an auxiliary server
1 Choose Administration→System Information from the 5620 SAM main menu. The
System Information form opens.
2 Click on the Auxiliary Servers tab.
3 Select the auxiliary server and click Properties. The Auxiliary Server (Edit) form
opens.
4 Set the Operation Mode parameter to In Service.
5 Click OK to commit the change and close the form.
6 Close the System Information form.
7 Log on to the auxiliary server station as the samadmin user.
8 Open a console window.
9 Enter the following:
bash$ /opt/5620sam/auxserver/nms/bin/auxnmsserver.bash auxstart
↵
The auxiliary server starts. The initialization may require twenty minutes or more.
10 Close the console window.
Procedure 15-12 To stop an auxiliary server
1 Choose Administration→System Information from the 5620 SAM main menu. The
System Information form opens.
2 Click on the Auxiliary Servers tab.
Caution — Performing this procedure may be service-affecting. Ensure
that you perform this procedure only during a scheduled maintenance
period.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01