Troubleshooting guide

15 — As required maintenance tasks
15-18 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
iii Enter the following to start the database proxy:
# /etc/rc3.d/S965620SAMOracleProxyWrapper start ↵
Do not proceed until the command returns the following:
Done
iv Close the console window.
v Log out of the database station.
14 Perform the following steps.
i Log in to the standby main server station as the samadmin user.
ii Navigate to the /opt/5620sam/server/nms/bin directory.
iii Enter the following to stop the main server:
bash$ ./nmsserver.bash force_stop ↵
The standby main server stops.
iv Enter the following to display the server status:
bash$ ./nmsserver.bash appserver_status ↵
The server application is stopped when the command returns the following:
Application Server is stopped
v On the primary main server station, enter the following:
bash$ ./nmsserver.bash force_restart ↵
The primary main server restarts.
vi Enter the following to display the server status:
bash$ ./nmsserver.bash -s nms_status ↵
The command returns server status information.
If the main server is not completely started, the first line of status
information is the following:
Main Server is not ready...
The main server is completely started when the command returns the
following:
Caution — If the command returns a different message, wait five
minutes and repeat the step. Do not proceed until the server
application is stopped.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01