Troubleshooting guide

15 — As required maintenance tasks
Alcatel-Lucent 5620 Service Aware Manager 15-17
5620 SAM
System Administrator Guide
- sqltxplain
- appqossys
- outln
- dip
- system
- exit
7 Enter a user name. The script prompts you for a password.
8 Enter the new password, which must:
• Be between 4 and 30 characters long
• Contain at least three of the following:
• lower-case alphabetic character
• upper-case alphabetic character
• numeric character
• special character, which is one of the following:
# $ _
• Not contain four or more of the same character type in sequence
• Not be the same as the user name or the reverse user name
• Not contain a space character
• Differ by at least four characters from the current password
If the password is valid, the script prompts you to retype the password.
9 Enter the new password again. The following prompt is displayed:
WARNING: Changing passwords may cause instability to the 5620 SAM
server as well as the Oracle proxy on the database server.
Do you want to proceed (yes/no)?:
10 Enter yes ↵. The script displays status messages and then exits. If the status
indicates a password change failure, contact Alcatel-Lucent technical support.
11 Record the password in a secure location.
12 If you are changing a password other than the SYS or database user password, go
to step 16.
13 Perform the following steps on each 5620 SAM database station.
i Log in to the database station as the root user.
ii Enter the following to stop the database proxy:
# /etc/rc3.d/S965620SAMOracleProxyWrapper stop ↵
Do not proceed until the command returns the following:
Done
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01