Troubleshooting guide

15 — As required maintenance tasks
Alcatel-Lucent 5620 Service Aware Manager 15-13
5620 SAM
System Administrator Guide
6 Close the console window.
7 Log out of the auxiliary database station.
Procedure 15-9 To change the Oracle SYS or 5620 SAM database user
password in a standalone 5620 SAM system
Perform this procedure to change the password of a user associated with the 5620 SAM
database or Oracle functions in a standalone 5620 SAM system.
1 Log in to the main server station as the samadmin user.
2 Open a console window and navigate to the /opt/5620sam/server/nms/bin
directory.
3 Enter the following:
bash$ ./nmsserver.bash passwd ↵
The script prompts you for the current SYS user password.
4 Enter the password. The script validates the password, and then displays a list of
user names like the following:
SAM Database Users:
- sys
- database_user_name (installation default is samuser)
Other Database Users:
- sqltxplain
- appqossys
- outln
Caution — The procedure requires a restart of the 5620 SAM main
server, which is service-affecting. Alcatel-Lucent strongly recommends
that you perform this procedure only during a scheduled maintenance
period.
Note 1 — Before you perform the procedure, you must ensure that
each 5620 SAM main server, auxiliary server, and database is running
and operational.
Note 2 — You can use the procedure to change only one user password
at a time. To change multiple user passwords, you must perform the
procedure multiple times.
Note 3 — When you change a password on one station, the 5620 SAM
automatically updates the password on all other 5620 SAM stations.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01