Troubleshooting guide

15 — As required maintenance tasks
15-12 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
3 Enter the following:
# passwd samadmin ↵
The following prompt is displayed:
New Password:
4 Enter the new password and press ↵.
The following prompt is displayed:
Confirm New Password:
5 Enter the new password again and press ↵. The password is changed.
Record the new password and store it in a secure location.
6 Close the console window.
7 Log out of the component station.
Procedure 15-8 To change the samauxdb user password
Perform this procedure to change the password of the samauxdb user on a 5620 SAM
auxiliary database station.
1 Log in to the auxiliary database station as the root user.
2 Open a console window.
3 Enter the following:
# passwd samauxdb ↵
The following prompt is displayed:
New Password:
4 Enter the new password and press ↵.
The following prompt is displayed:
Confirm New Password:
5 Enter the new password again and press ↵. The password is changed.
Record the new password and store it in a secure location.
Caution — You must change the samauxdb password on each station in
the auxiliary database cluster, and must set each password to the same
value.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01