Troubleshooting guide

15 — As required maintenance tasks
Alcatel-Lucent 5620 Service Aware Manager 15-9
5620 SAM
System Administrator Guide
iii Navigate to the /opt/5620sam/auxserver/nms/bin directory.
iv Enter the following:
bash$ ./auxnmsserver.bash auxforce_stop ↵
v Enter the following to display the auxiliary server status:
bash$ ./auxnmsserver.bash auxappserver_status ↵
The command returns a status message.
vi The auxiliary server is stopped when the command returns the following
status message:
Auxiliary Server is stopped
If the command returns a different message, repeat step v. Do not
proceed to the next step until the server is stopped.
c Perform the following steps to shut down a 5620 SAM database.
i Log in to the 5620 SAM database station as the root user.
ii Open a console window.
iii Enter the following:
# cd /etc/rc3.d ↵
iv Enter the following to stop the Oracle proxy daemon:
# ./S965620SAMOracleProxyWrapper stop ↵
Do not proceed until the command returns the following:
Done
v Enter the following to stop the 5620 SAM database daemon:
# ./S95db5620sam stop ↵
Do not proceed until the command returns the following:
Done
d Perform the following steps to shut down an auxiliary database in a 5620 SAM
auxiliary database cluster.
i Log in to the auxiliary database station as the root user.
ii Open a console window.
iii Enter the following to stop the database proxy daemon:
# /etc/init.d/samauxdbproxy stop ↵
iv Enter the following to stop the database daemon:
# /etc/init.d/samauxdb stop ↵
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01