Troubleshooting guide

2 — 5620 SAM user security
2-8 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
Table 2-3 Sample span rule configuration
After the span rule is created, the service administrator creates a new VPRN service
for the customer. The 5620 SAM uses the VPRN range policy to automatically
configure the service ID, and applies the associated customer span rule when the
service is saved. As a result, the service is added to the customer span and to the
Default Service Span. The service administrator has Edit Access to the customer
span, and, therefore, can modify the service, as required.
Task Description
1. Create a span that
contains the existing
customer services.
• Choose Administration→Security→5620 SAM User Security from the 5620 SAM main
menu.
• Choose Create→Span on the Span of Control tab.
• Specify a span name for the customer services.
• Use the Contents tab to specify the customer X services.
2. Create a span of control
profile for the service
administrator.
• Choose Administration→Security→5620 SAM User Security from the 5620 SAM main
menu.
• Choose Create→Profile on the Span of Control tab.
• Add the Default Service Span as a View Access span to the span of control profile, which
allows the user to create a service.
• Add the customer services span as an Edit Access span to the span of control profile.
3. Create a range policy for
each service type that the
service administrator for the
customer can create. In the
sample, the services are IES
and VPRN.
• Choose Administration→Format and Range from the 5620 SAM main menu.
• Choose Create→Range Policy.
• Specify IES Service as the Object Type.
• Specify Service ID as the Property Name.
• Configure a range.
• Click Add on the Users tab to assign the policy to the service administrator.
• Choose Create→Range Policy.
• Specify VPRN Service as the Object Type.
• Specify Service ID as the Property Name.
• Configure a range.
• Click Add on the Users tab to assign the policy to the service administrator.
4. Create a span rule that
contains the customer span.
• Choose Administration→Span Rules from the 5620 SAM main menu.
• Specify a name for the customer span rule.
• Set the Created In parameter to All listed spans.
• Add the customer span on the Spans tab.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01