Troubleshooting guide

11 — 5620 SAM maintenance base measures
11-6 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
Performance and scalability base measures
You can use the following 5620 SAM performance and scalability base measures to:
• record the system limit numbers and compare to the measurement data collected
in your network
• track network-specific growth to provide a delta for any performance measures
on similarly-sized platforms, for example, how long it takes to discover 10 new
devices versus 20 new devices
• quantify user perceptions of performance
Table 11-2 indicates some scalability base measures that can be used to baseline and
record scalability data.
Table 11-2 Scalability base measures
Type of base
measure
System limits Expected response time Network base
measure
response time
Additional
information
Total devices
managed
See the
appropriate
5620 SAM Release
Description and
5620 SAM Planning
Guide for
information about
release-specific
system limits.
The client GUI is
operational XX seconds
after launching.
The time to open icons
in the Equipment
navigation tree
increases depending
on the number of
configured MDAs.
Total services
• XML OSS configuration
of 300 VLL services in X
min
• XML OSS configuration
of 100 VPLS services
with 3 sites and one
SAP in 5 min
The complexity of the
service configuration
affects response time.
For example, adding
additional SAPs to a
VPLS increases
provisioning time.
Outstanding
alarms
The client GUI is able to
retrieve and display XX 000
alarms in the dynamic
alarm list during startup.
—
Client GUIs for
each server
— Open a configuration
form using the client
GUI in X amount of
time.
Measure X against a
constant platform size
over time
Device discovery Discover one additional
device with an IP address
in the X.X.X.1 to 255 range
in less than 1 min.
—
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01