Troubleshooting guide

9 — NE maintenance
Alcatel-Lucent 5620 Service Aware Manager 9-53
5620 SAM
System Administrator Guide
b Use the contextual menu for an NE.
i Select an NE icon in the 5620 SAM network navigation tree or topology
map.
ii Right-click on the NE icon and choose NE Sessions→File Browser. The
FTP File Browser form opens, then displays the Enter the Username and
Password form.
c Use the NE alarm contextual menu.
i Select an NE alarm in the 5620 SAM alarm window.
ii Right-click on the alarm item and choose NE Sessions→File Browser. The
FTP File Browser form opens, then displays the Enter the Username and
Password form.
2 Enter the user name and password of a user account with FTP access privileges on
the NE and click OK. If the NE accepts the credentials, the form lists the contents
of the NE.
<DIR> in the Type column indicates a directory. The file path to the current
directory is displayed in the Path field.
On an NE with redundant CPMs, the form lists the contents of the cf3 device on
the active CPM. You can browse the cf3 device on the standby CPM by specifying
cf3-B:\ in the Path field.
3 Navigate the file system as required. Perform one of the following actions to open
a directory and list the contents.
a Double-click on the directory row in the list.
b Select the directory row and press <CTRL>O.
c Type the path to the directory in the Path field and click Go.
4 If you opened the browser using the 5620 SAM main menu, you can browse another
NE file system using the same form, if required.
i Click Disconnect to end the browsing session.
ii Enter the IP address of the NE that you need to browse in the field at the top
of the form and click Connect.
5 Close the form.
Note — When you use the 5620 SAM main menu to open a file-browser
session, you are not restricted to the original NE; you can use the same
form to connect to other NEs. This is useful when you need to browse
several NEs in succession.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01