Troubleshooting guide

9 — NE maintenance
9-50 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
5 Select a software image in the list and click Activate.
6 Click Yes to activate the software image.
7 Verify the activation success, as described in Procedure 9-32.
8 Close the form.
Procedure 9-30 To export a device software image from the
5620 SAM database to a file system
1 Choose Administration→NE Maintenance→Software Upgrade from the 5620 SAM
main menu. The Software Upgrade form opens.
2 Click on the Software Images tab.
3 Select a software image in the list and click Export. A file navigator form opens.
To export an OmniSwitch software image, perform this step on the AOS Software
tab.
4 Navigate to the directory that will contain the exported software image and click
OK. The software image is saved to files in the specified directory.
5 Close the form.
Procedure 9-31 To monitor software upgrade status
1 Choose Administration→NE Maintenance→Software Upgrade from the 5620 SAM
main menu. The Software Upgrade form opens.
2 Click on the Software Upgrade Status tab.
3 Configure the filter criteria, if required, and click Search. A list of NEs is
displayed.
4 Select an NE from the list and click Properties. The Software Upgrade Status
(View) form opens.
5 Click on the Software Upgrade tab to view information on the software upgrade.
6 Close the forms.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01