Troubleshooting guide

9 — NE maintenance
9-38 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
viii Click View Dependencies. A dialog box displays the number of objects that
rebooting the ISA-AA MDA may affect.
ix Click OK.
x When you are certain that rebooting the MDA has no unintended effects,
select the check box and click Yes. The 5620 SAM reboots the ISA-AA MDA.
xi After the MDA reboots, right-click on the Daughter Card Slot object and
choose Turn Up. A dialog box appears.
xii Click Yes. The 5620 SAM turns up the ISA-AA MDA.
15 Click on the Software Upgrade Status tab.
16 View the Upgrade Status, which is one of the following:
• Success—The new image is successfully loaded on each ISA-AA MDA.
• Failed to upgrade ISA—The upgrade is a failure on at least one ISA-AA MDA.
17 If required, verify the upgrade as described in Procedure 9-32.
18 If required, use the 5620 SAM FTP or SSH file browser to verify that the transferred
file and configuration are on each upgraded NE. See Procedure 9-35 for
information about using the FTP file browser. See Procedure 9-36 for information
about using the SSH file browser.
19 Update each ISA-AA policy, as required, to enable the new protocol signatures.
See the 5620 SAM User Guide for information about configuring AA policies.
Procedure 9-23 To perform an on-demand software upgrade or ISSU
on an OmniSwitch
Perform this procedure to upgrade the device software on an OmniSwitch. You can
perform an on-demand software upgrade on any supported OmniSwitch variant.
Note — ISSU is supported only on the OS 9700E, OS 9800E, and OS 10K.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01