Troubleshooting guide

9 — NE maintenance
Alcatel-Lucent 5620 Service Aware Manager 9-23
5620 SAM
System Administrator Guide
5 To configure the storage location for the NE configuration rollback checkpoint
files:
i In the Checkpoint File Storage panel, configure the required parameters.
ii Configure the Rollback Location Type parameter.
• If you specified FTP, in the Checkpoint File Storage — Remote Location
panel, configure the required parameters.
• If you specified CFLASH, in the Checkpoint File Storage — CFLASH panel,
configure the required parameters.
iii Save your changes. The Checkpoint Files tab lists the checkpoint files.
6 Close the forms.
Procedure 9-12 To create an NE configuration rollback rescue file
The rollback rescue file storage location must be configured before you can create the
NE configuration rollback rescue file; see Procedure 9-11.
1 Choose Administration→NE Maintenance→NE Configuration Rollback from the
5620 SAM main menu. The NE Configuration Rollback form opens.
2 Click on the NE Rollback tab. The NE Rollback list form opens.
3 Choose a device from the list and click Properties. The NE Rollback (Edit) form
opens.
4 Click Create Rescue File and confirm the action. The rescue file is saved to the
specified file location. The Delete Rescue File, View Rescue File, and Revert to
Rescue File buttons are enabled.
5 Close the forms.
Note — If a rescue file exists, the Rescue File Exists parameter is
enabled, and the dialog box prompts you to confirm that you need to
overwrite the existing rescue file.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01