Troubleshooting guide

9 — NE maintenance
Alcatel-Lucent 5620 Service Aware Manager 9-17
5620 SAM
System Administrator Guide
7 Click Apply.
8 Click on the Backup/Restore Policy Assignment tab and distribute the policy to one
or more NEs, as required.
9 Close the form.
Procedure 9-4 To perform an on-demand device backup, restore, or
configuration save
When you start an on-demand backup, you back up the device configuration based on
the backup policy associated with the NE.
A device configuration restore operation uses the most recently backed-up device
configuration file unless otherwise specified. See Procedure 9-7 for more information.
The following conditions must be present before you can perform a device
configuration backup, restore, or configuration save:
• You have a 5620 SAM user account with an administrator or network element
software management scope of command role or a scope of command role with
write access to the mediation package. See chapter 2 for more information
about scope of command roles.
• FTP or secure FTP is configured in the mediation policy for the NE. See the
5620 SAM User Guide for more information.
• The BOF persist parameter is set on the 7210 SAS, 7450 ESS, 7750 MG, 7710 SR,
7750 SR, or 7950 XRS. See the 5620 SAM User Guide for information about
device commissioning.
Depending on the operation type, the Backup State or Restore State column displays
the current state of the operation. The possible values are:
• Not Attempted - the operation is unattempted
• Saving Config - the device configuration is being saved on the device
• Transferring Files - a file transfer is in progress
• Success - the operation is complete and successful
• Failure - the operation is complete but unsuccessful
• CPM Sync and Pending Reboot - the device configuration is restored and the
device is synchronizing the CPMs before it reboots
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01