Troubleshooting guide

7 — 5620 SAM database management
Alcatel-Lucent 5620 Service Aware Manager 7-11
5620 SAM
System Administrator Guide
Code 7-1: Deletion interval parameters
<ageout>
<class name="ressubscr.ResidentialSubscriberInstance"
ageoutSyncTime="00:00"
ageoutInterval="1">
</class>
</ageout>
vii Modify the ageoutSyncTime and ageoutInterval values, as required.
viii Save and close the AgeoutConstraint.xml file.
ix Navigate to the /opt/5620sam/server/nms/bin directory.
x Enter one of the following, depending on the main server you are configuring:
• On a standalone main server, or the primary main server in a redundant
deployment:
bash$ ./nmsserver.bash read_config ↵
• On the standby main server in a redundant deployment:
bash$ ./nmsserver.bash force_restart ↵
The 5620 SAM puts the configuration change into effect.
xi Log out of the main server station.
Procedure 7-8 To create a database file policy to manage database
log or core dump files
You can create database file policies to manage the file size and number of archives
for stored alert, listener, trace, audit, and core dump files. When the size and number
of files are left unbounded, excessive database disk capacity is consumed.
Database trace, alert, and audit log files are compressed and stored in the alert log
directory. Database listener log files are stored in the listener log directory.
1 Choose Administration→Database from the 5620 SAM main menu. The Database
Manager (Edit) form opens.
2 Click on the File Policies tab.
3 Click Database File Policies or choose a default policy and click Properties. The
Database File Policies Create|Edit) form opens. If you selected a default policy,
go to step 5.
4 Click Create.
Note — For historical or troubleshooting purposes, Alcatel-Lucent
recommends that you archive the 5620 SAM database log files on a
regular basis.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01