Troubleshooting guide

5 — 5620 SAM component configuration
Alcatel-Lucent 5620 Service Aware Manager 5-33
5620 SAM
System Administrator Guide
5.8 System preferences configuration procedures
The following procedure describes how to configure 5620 SAM system preferences
that affect the system-wide behavior of various global settings and functions.
Procedure 5-24 To configure 5620 SAM system preferences
Perform this procedure to customize or change the default value of 5620 SAM system
preferences to meet your specific operational requirements.
1 Choose Administration→System preferences from the 5620 SAM main menu. The
System Preferences form opens.
Table 5-3 lists the settings and functions that can be configured using the System
Preferences form, and the location of additional information if applicable. System
preferences are listed by the functional tabs on the System Preferences form.
Caution — Changing a system preference parameter value may
adversely affect the 5620 SAM service or function. Do not change the
parameter value from the default without contacting Alcatel-Lucent
technical support.
Note — You need a user account with the Administrator scope of
command role to perform this procedure.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01