Troubleshooting guide

5 — 5620 SAM component configuration

5-28 Alcatel-Lucent 5620 Service Aware Manager

5620 SAM

System Administrator Guide

Procedure 5-19 To enable LSP on-demand resynchronization

By default, the LSP on-demand resynchronization functionality is disabled. When you

enable LSP on-demand resynchronization, the 5620 SAM scheduled resynchronization is

then disabled for some LSP objects. See “LSP on-demand resynchronization” in the

5620 SAM User Guide for information about which LSP objects do not support

on-demand resynchronization.

1 Log in to the main server station as the samadmin user.

2 Navigate to the /opt/5620sam/server/nms/config directory .

3 Create a backup copy of the nms-server.xml file.

4 Open the nms-server.xml file using a plain-text editor.

5 Locate the following line:

6 Change "false" to "true".

7 Save and close the nms-server.xml file.

8 Navigate to the /opt/5620sam/server/nms/bin directory.

9 Enter the following:

bash$ ./nmsserver.bash read_config ↵

The main server reads the nms-server.xml file and enables LSP on-demand

resynchronization.

Procedure 5-20 To enable debug configuration file reloading on an

NE for mirror services

Perform this procedure to ensure that managed NEs reload the debug configuration file

after an NE restart. This ensures that the mirror services in the managed network

resume operation after a reboot or a CPM activity switch on the NE that hosts the mirror

service. By default, debug configuration file reloading is disabled.

1 Log in to the main server station as the samadmin user.

2 Open a console window.

Caution — Modify only the parameters specified in this procedure.

Unauthorized modification of the nms-server.xml file can seriously

affect network management and 5620 SAM performance.

Caution — This procedure requires a 5620 SAM main server restart,

which is service-affecting.

Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01