Troubleshooting guide

5 — 5620 SAM component configuration
Alcatel-Lucent 5620 Service Aware Manager 5-27
5620 SAM
System Administrator Guide
The main server reads the nms-server.xml file and enables the server CAC features
on the client delegate server.
Procedure 5-18 To enable alarm reporting to identify duplicate NE
system IP addresses
Perform this procedure to enable the 5620 SAM to verify the uniqueness of NE system
IP addresses. When verification is enabled, the 5620 SAM generates an alarm when an
NE reports a system IP address that is in use by another NE.
1 Log in to the main server station as the samadmin user.
2 Open a console window.
3 Navigate to the /opt/5620sam/server/nms/config directory.
4 Open the nms-server.xml file using a plain-text editor.
5 Locate the following tag that marks the beginning of the SNMP section:
<snmp
6 Add the following before the end of the SNMP section, ensuring that there is a
space between the last character and the section end, which is marked by a />
tag:
verifyNodeIdentity=”1"
7 Save and close the nms-server.xml file.
8 Navigate to the /opt/5620sam/server/nms/bin directory.
9 Enter the following:
bash$ ./nmsserver.bash read_config ↵
The main server reads the nms-server.xml file and alarm reporting for duplicate
NE system IP addresses is enabled.
Caution — Contact your Alcatel-Lucent technical support
representative before you attempt to modify the nms-server.xml file.
Modifying the nms-server.xml file can have serious consequences that
can include service disruption.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01