Troubleshooting guide

5 — 5620 SAM component configuration
5-26 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
Procedure 5-17 To configure service CAC to automatically bind PBB
tunnels
Configure the service CAC functionality to enable the 5620 SAM to automatically bind
PBB tunnels to services based on the available bandwidth.
1 Close each 5620 SAM client that connects to the main server through the client
delegate server, by choosing Application→Exit from the 5620 SAM main menu.
2 Log in to the main server station as the samadmin user.
3 Open a console window.
4 Navigate to the /opt/5620sam/server/nms/config directory.
5 Open the nms-server.xml file using a plain-text editor.
6 Locate the following XML tag:
<require-CAC
The service CAC section should read as follows:
<require-CAC
enabled="false"
defaultBWThreshold="90"
linkTunnelCacheMaxSize="1000"
tunnelServiceCacheMaxSize="10000"
serviceBWCacheMaxSize="50000"
/>
7 Change enabled="false” to enabled="true".
8 Save and close the nms-server.xml file.
9 Navigate to the /opt/5620sam/server/nms/bin directory.
10 Enter the following:
bash$ ./nmsserver.bash read_config ↵
Note 1 — This feature has limited availability. Contact your
Alcatel-Lucent technical support representative for information about
the availability of this feature.
Note 2 — You must perform this procedure on each main server in a
5620 SAM system.
Caution — Contact your Alcatel-Lucent technical support
representative before you attempt to modify the nms-server.xml file.
Modifying the nms-server.xml file can have serious consequences that
can include service disruption.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01