Troubleshooting guide

5 — 5620 SAM component configuration
Alcatel-Lucent 5620 Service Aware Manager 5-23
5620 SAM
System Administrator Guide
5 Select an object and property for which you need to apply the name format policy
in the Property panel.
6 Click on the Users tab.
7 Click Add. The Select User form opens with a list of users.
8 Select one or more users in the list and click OK. The Format Policy form is
refreshed with the selected users.
9 Click on the User Groups tab.
10 Click Add. The Select Group form opens with a list of user groups.
11 Choose one or more user groups in the list and click OK. The Format Policy (Create
| Edit) form is refreshed with the selected user groups.
12 Click on the Text Block Formats tab to further define the format of the text. For
example, an operator can classify a group of services with a similar name. The
operator can also create a tool tip text to describe the purpose of the parameter.
13 Click Move Up or Move Down to change the sequence of the text blocks in the text
string.
14 Click Create and perform one of the following:
a Choose Auto-Filled Parameter. The Auto-Filled Parameter (Create) form
opens.
b Choose Masked Text Parameter. The Formatted Text (Create) form opens.
c Choose Text Parameter. The Text (Create) form opens.
15 Configure the required parameters.
The Min. Length and Max. Length parameters are not configurable when the Read
Only parameter is enabled.
16 Save your changes and close the forms.
Note — Only users and user groups that are assigned to this policy are
affected by the policy. You can apply one or more format policies to a
user or user group. See Chapter 2 for more information about creating
users and user groups.
Note — After a format policy is applied to a service, a drop-down menu
is displayed beside the object field during object creation, to indicate
that a format policy is in effect. When there is only one matching policy,
the drop-down menu is dimmed. When there are multiple matching
policies, the drop-down menu is used to choose a policy. The sequence
of the policies in the drop-down menu is based on the value of the
Priority parameter.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01