Troubleshooting guide

5 — 5620 SAM component configuration
5-18 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
<guiPreferences path="new_file_location" />
where new_file_location is the new default GUI table layout and GUI preferences location
7 To change the default script result file location, insert the following line directly
above the </configuration> line at the end of the file:
<cache directoryName="new_file_location" />
where new_file_location is the new default script result file location
8 Save and close the nms-client.xml file. Subsequent 5620 SAM client sessions on the
client delegate server use the new file location.
Procedure 5-10 To change the IP address or hostname of a 5620 SAM
system component
Changing the IP address or hostname of one or more 5620 SAM components in a
standalone or redundant system may be required, for example, when the management
network topology changes.
Note — The specified location can be an absolute file path or a file
path relative to install_dir/nms, where install_dir is the client
installation location.
Note — The specified location can be an absolute file path or a file
path relative to install_dir/nms, where install_dir is the client
installation location.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01