Troubleshooting guide

5 — 5620 SAM component configuration
Alcatel-Lucent 5620 Service Aware Manager 5-17
5620 SAM
System Administrator Guide
iv Modify the nameOne (for standalone) or nameOne and nameTwo (for
redundant) parameters to indicate the domain name and hostname of the
server, for easier identification by operators. This name does not have to be
the hostname of the server domain. In some cases, the name may be the
same for the active and standby server in a redundant server domain. The
name is not automatically derived from a host lookup.
v Save the changes and close the file.
6 Log in to the client GUI. The new server options are displayed in the Server
drop-down menu.
Procedure 5-9 To change the default user file locations on a client
delegate server
Perform this procedure to configure the default location of one or more of the following
on a 5620 SAM client delegate server:
• user preference files that contain the following information:
• saved table layouts
• preferences saved using Application→User Preferences
• script result files
1 Close each 5620 SAM GUI client that connects through the client delegate server
by choosing Application→Exit from the 5620 SAM main menu.
2 Log in to the client delegate server station as the samadmin user.
3 Open a console window.
4 Navigate to the client configuration directory, typically
/opt/5620sam/client/nms/config on RHEL, and C:\5620sam\client\nms\config on
Windows.
5 Open the nms-client.xml file using a plain-text editor.
6 To change the default GUI preferences and table layout file location, insert the
following line directly above the </configuration> line at the end of the file:
Note — Common hostname restrictions apply to the nameOne and
nameTwo fields. You cannot use the following special characters:
• !
• #
• $
• %
• &
• (
• )
• +
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01