Troubleshooting guide

4 — TCP enhanced authentication
Alcatel-Lucent 5620 Service Aware Manager 4-7
5620 SAM
System Administrator Guide
5 Click Local Audit On. The Local Audit form opens.
6 Perform one of the following from the Policy scope menu:
a Choose Global and go to step 7.
b Choose Local to choose an NE. The Select a Network Element form opens.
i Select an NE and click OK. The NE IP address is displayed in the Local
Node IP Address field.
ii Go to step 7.
7 Click OK. The Local Audit form closes and the appropriate global|local policy
opens for comparison.
8 View the differences between the key chains by clicking on the tabs that are
highlighted with an arrow icon to indicate that differences exist on the forms. An
arrow icon beside a property indicates that the property is modified. In lists, new
entries are highlighted in pink and modified entries are highlighted in purple.
9 Close the forms.
Note 1 — You can cancel the local audit at any time by clicking Local
Audit Off on the KeyChain (Edit) form.
Note 2 — The 5620 SAM does not identify differences between the
Begin Time and End Time properties of key chains.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01