Troubleshooting guide

4 — TCP enhanced authentication
4-6 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
iii Choose one or more entries in the Available Local Policies panel and click on
the right arrow. The chosen entries move to the Selected Local Policies
panel.
iv Depending on the current distribution mode of the chosen entries, perform
one of the following:
• Click Sync With Global.
• Click Local Edit Only.
The distribution mode of the selected entries changes accordingly.
v Close the Distribution Mode form.
6 Close the TCP KeyChains form.
Procedure 4-3 To verify the distribution of a global key chain to NEs
Perform the following procedure to view a list of the NEs to which the 5620 SAM has
successfully distributed a specific TCP key chain.
1 Choose Administration→Security→TCP KeyChains from the 5620 SAM main menu.
The TCP KeyChains form opens.
2 Select a key chain and click Properties. The KeyChain (Edit) form opens.
3 Click on the Local Definitions tab. The NEs that have a local instance of the key
chain are displayed in a list.
4 View the list of NEs to confirm that the key chain is distributed to the required
NEs.
5 Close the forms.
Procedure 4-4 To identify differences between a global and local key
chain policy or two local key chains
1 Choose Administration→Security→TCP KeyChains from the 5620 SAM main menu.
The TCP KeyChains form opens.
2 Choose Local from the Policy scope menu to select a local NE. The Select a
Network Element form opens.
3 Select an NE and click OK. The NE IP address is displayed in the Local Node IP
Address field.
4 Choose the local key chain that you need to compare with another key chain and
click Properties. The KeyChain (Edit) form opens.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01