Specifications

2
Figure 1. Physical Characteristics
Keypad Controls and Indicators
Keypad
Backlight: The ON/OFF button located on the upper left hand
side of the unit is used to toggle the backlight of the LCD dis-
play on or off. The backlight is initially in the OFF position.
Power:
The two buttons located on the upper right side of the
unit power the unit on and off.
Note: The TS1000 will automatically power off after two
minutes if no buttons on the unit are pressed.
Arrow Keys
Up Arrow: Returns to the previous option of the main screen
or to the previous results screen.
Down Arrow: Takes the user to the next option on the main
screen or to the next results screen.
Left Arrow:
Press to stop a test in progress, exit a test that
has completed or return to the main screen if an error has
occurred.
Right Arrow:
Used to execute options from the main
screen
such as “Run Test” or “System Configuration”.
Interfaces
RJ-45: The RJ-45 interface located at the top of the unit
accepts the RJ-45 to dual telco clip and RJ-11 cable supplied
with the TS1000. This is the only cable used for testing.