Specifications

the NULL modem cable. If the connection is successful, a

status bar will indicate the progress of the download. Once

com-pleted, the TS1000 will reset itself and invoke the

updated soft- ware. From this point you may continue testing

or power off the unit.

Inserting/Replacing Batteries

The TS1000 uses standard off-the-shelf "AA" sized alkaline

batteries. It is recommended you replace the batteries once

the Battery Indicator on the LCD display shows 10%.

1. Ensure the unit is disconnected from the line and is

turned OFF.

2. Remove battery cover by removing the screw.

3. Remove old batteries from TS1000 and discard/recycle.

Be sure to follow local and national laws in the proper

disposal and/or recycling of alkaline batteries.

4. Insert 4 new "AA" sized alkaline batteries. Be sure to

properly align battery terminals and the TS1000 battery

con-nections.

Figure 4. Battery Placement

5. Place the battery cover over the batteries and tighten the

screw.

6. Turn on the TS1000 to make sure the unit operates prop-

erly.