Specifications

12
The user can then choose from three options: Send to PC,
Send to Printer or Save in Memory. An explanation of each is
given below.
1. Send to PC:
The TS1000 can send data to a PC via a NULL modem cable.
The user must use a PC based terminal program to accept the
data from the TS1000 when this function is per-formed. Please
use the following settings for the terminal program:
• Bits per second: 57600
• Data bits: 8
• Parity: None
• Stop Bits: 1
• Flow Control: None
• ASCII Receiving: Append line feeds to incoming line ends
The terminal program should allow the user to “capture” text
data. If the text that is sent to the PC from the TS1000 is cap-
tured into a *.CSV file, the *CSV file can be easily read into
Microsoft Excel.
Move cursor (*) to the Send to PC position and press the right
arrow key on the TS1000.
The results will include all the upstream and downstream nego-
tiated results as well as Carrier load (bit/bin) information. By
using Microsoft Excel, the data can be plotted for a graphical
look at the test result data.
2. Send to Printer:
The TS1000 can print results to a printer via it’s serial port. The
TS1000 has been designed to work with the portable Seiko
DPU-201 and DUP-414 series of printers. Connect the TS1000
to the printer using a “STRAIGHT” serial cable (not a NULL
modem cable). Move cursor (*) to printer position and press the
right arrow key on the TS1000. The results of the last com-
pleted test or recalled Demo results will be printed. The print
transfer rate is 9600 baud.
*Send to PC
Send to Printer
Save in Memory
Press to send
ts1000_014