Specifications

8
3. Press the right arrow button to start the test. The TS1000
will attempt to negotiate with the ATU-C. If an ATU-C can-
not be found, the test will time out. The length of time that
the TS1000 will try to negotiate with the ATU-C is based
upon the time set under the Setup option for Negotiated
Time. Please refer to the Configuring Tests section for addi-
tional information. While attempting to connect, the text
message "Modem Connect In Progress" will be displayed.
If connection is made, the test set will automatically display
the upstream and downstream results. If the attempt to
connect fails, the text message "Modem Connect FAILTime
Expired" will be displayed.
4. If the negotiation with the ATU-C is successful, the TS1000
will be in “showtime” and will display the following results:
Press the down arrow to see more results.
Press the down arrow to see more results. This new results
screen also allow the user to save the results of the mea-
surement.
Main Menu B: 90%
*Run Test
Run G.LITE
Press to start
ts1000_009
Modem Connect
In Progress
9 seconds
Press < to Stop
ts1000_023
Result: Dwn Up
MaxB/R: 7904 946
B Rate: 7904 928
Capac: 100% 98%
ts1000_021
Result: Dwn Up
IntB/R: 0 0
NseM : 8.0 11.5
Power: 12.0 7.5
ts1000_022
Result: Dwn Up
Atten : 2.0 1.0
Op. Mode: ANSI
Press to save
ts1000_010