Specifications

7
3. Moving the cursor (*) beside each option, the user can
modify the amount of time that the TS1000 tries to
negotiate with an ATU-C (Negotiated) and the amount
of time that the TS1000 remains synchronized with the
ATU -C (Connected). There are some parameters,
such as Noise Margin and Attenuation that are
updated every 10 seconds.
The range of values for the Negotiated time can be set
from 20 seconds to 100 seconds in 20 second incre-
ments. The range of values for the Connected time is
from 0 seconds to 100 seconds in 20 second incre-
ments.
Pressing the right arrow key multiple times will
increase the time limit until it reaches 100 seconds
and then it will loop back to the first and the process
will repeat.
.
Running Tests
The TS1000 is designed to make ADSL turnup easy. The
unit will emulate an ATU-R to the point that it can hand-
shake and connect with an ATU-C and report the upstream
and downstream parameters. Simply connect to the line,
turn on the TS1000 and select the desired test to run.
Results obtained include upstream and downstream
throughput and noise margin.
1. Connect the TS1000 to the line. Be aware of the cor-
rect pinouts.
2. Press the Power ON button. The main screen will be
displayed after the unit has successfully completed a
self diagnostic test. Ensure the cursor (*) is positioned
beside the desired testing option; Run Test or Run
G.Lite. The Run Test option will allow the TS1000 to
negotiate with ATU-C’s that are compliant to T1.413
Issue 2 and/or ITU-T G.992.1 (G.DMT) standards. The
TS1000 will also report to which standard it tested to
as negotiated with the ATU-C. The Run G.Lite option
allows the TS1000 to negotiate with ITU-T G.992.2
compliant ATU-C’s.
Time Limit Setup
Negotiated 20s
*Connected 20s
Press to change
ts1000_007