User Guide

36
11. SAFETY
The device is supplied by an AC/DC mains adapter in conformity with standard EN 60950.
Its input is classified as hazardous and its output as SELV (Security Extra Low Voltage).The mains adapter
must be installed close to the device and must be easily accessible.
To disconnect the device from the primary power source, the mains adapter must be removed from the
230V AC 50 Hz outlet.
If the mains adapter fails, it must be replaced by an identical model.
If not connected to the mains power or if there is a mains power failure, installations with cordless handsets
will no longer work. You will then be unable to make or receive calls in the event of an emergency. This
is why we recommend that you also have a conventional telephone as a backup.
This device is designed for connection to a TNV-3 analogue telephone line.
The handset battery must be disposed of in compliance with waste disposal legislation.
In the event of battery fluid leakage, avoid contact with the skin, eyes and mouth. In the event of contact,
rinse the affected area for several minutes under running water. Clean up the fluid with absorbent paper
or a dry cloth, and contact your retailer to replace the batteries.
! Do not use your telephone to report a gas leak while standing close to the leak.
In stormy weather, we recommend that you not use this device.
ATLINKS hereby declares that the Versatis 150 is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
The certificate of conformity is available on web site: "www.atlinks.com" or will be sent to you upon request.
Versatis-150_uk.qxd 08/03/02 15:50 Page 36