User Guide

Chapter 2
Basic Installation
E-DOC-CTC-20050401-0007 v1.0
8
VoIP Connections The SpeedTouch™ allows you to make telephone calls over the Internet, using a
traditional phone. To be able to use the VoIP service, your provider will give you a
telephone number like Uniform Resource Identifier (URI), user name and password.
To call a person who is not connected to the Internet and the VoIP service, you can
switch to the regular telephone line (PSTN).
For more information, see the User’s Guide on the SpeedTouch™ Setup CD.
Powering the
SpeedTouch™
To power on the SpeedTouch™, press the power button on the SpeedTouch™ rear
panel.
During the start-up procedure, the power LED on the front panel is lit red for some
seconds. As soon as the power LED is solidly lit green, your SpeedTouch™ is ready
for service. After another couple of seconds, also the DSL LED will light green.
If these LEDs do not light, please refer to ”Checking the LEDs” on page 31. A
comprehensive LED overview can be found in the SpeedTouch™ User’s Guide.
To power off your SpeedTouch™, press the same button.