SpeedTouch™110g IEEE802.11g Wireless PC Card Setup and User’s Guide Release R1.0.
SpeedTouch™ 110g Setup and User’s Guide R1.0.
Copyright Copyright ©1999-2004 THOMSON. All rights reserved. Passing on, and copying of this document, use and communication of its contents is not permitted without written authorization from THOMSON. The content of this document is furnished for informational use only, may be subject to change without notice, and should not be construed as a commitment by THOMSON. THOMSON assumes no responsibility or liability for any errors or inaccuracies that may appear in this document.
Contents Contents E-DOC-CTC-20040401-0001 v3.0 1 SpeedTouch™110g Installation................................... 7 1.1 About your SpeedTouch™110g ....................................................... 8 1.2 SpeedTouch™110g Installation ....................................................... 9 2 Wireless Client Manager ............................................ 11 2.1 Configuration ............................................................................... 12 2.2 Link Information .......
Contents 4 E-DOC-CTC-20040401-0001 v3.
About this Setup and User’s Guide About this Setup and User’s Guide In this Setup and User's Guide This Setup and User’s Guide will assist you in getting acquainted with the SpeedTouch™110g and in getting connected to a wireless network. Used Symbols A note provides additional information about a topic. A tip provides an alternative method or shortcut to perform an action. ! Documentation and software updates A caution warns you about potential problems or specific precautions that need to be taken.
About this Setup and User’s Guide 6 E-DOC-CTC-20040401-0001 v3.
Chapter 1 SpeedTouch™110g Installation 1 SpeedTouch™110g Installation Introduction The SpeedTouch™110g is a 54 Mbps wireless network adapter that seamlessly integrates with existing Ethernet networks to support applications such as mobile users or temporary conferences. Just install enough wireless access points to cover your network area, plug wireless cards into your computers, and start networking.
Chapter 1 SpeedTouch™110g Installation 1.1 About your SpeedTouch™110g Package Checklist The SpeedTouch™110g package includes: SpeedTouch™110g wireless PC Card SpeedTouch™110g Setup CD-ROM Quick Installation Guide Safety Instructions and Regulatory Information Please inform your dealer if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including the original packing materials in case there is a need to return it.
Chapter 1 SpeedTouch™110g Installation 1.2 SpeedTouch™110g Installation System Requirements Before you install the SpeedTouch™110g check your system for the following: A computer with a PCMCIA (Cardbus) slot Microsoft Windows 98 SE/Me/2000/XP You may need your Windows installation CD during driver and utility installation. A minimum of 1.
Chapter 1 SpeedTouch™110g Installation 4 The Setup window will appear: 5 The InstallShield Wizard will start installing the utility software. This may take a few minutes. Once the software installation is finished, this message will appear: 6 Firmly insert the Card, with the adapter label facing up, into your computer’s Cardbus slot. 7 After inserting the Card, Windows will detect that new hardware has been installed. You may be asked to restart your computer.
Chapter 2 Wireless Client Manager 2 Wireless Client Manager Using the Wireless Card Manager utility To configure the SpeedTouch™110g, double-click the SpeedTouch™110g Wireless Client Manager icon on the desktop to launch the utility: You can also access it from Windows’ Start menu. As a result the SpeedTouch™110g Wireless Client Manager utility appears: Configuration tabs The wireless card manager includes five tabs: Configuration Allows you to configure the SpeedTouch™110g wireless settings.
Chapter 2 Wireless Client Manager 2.1 Configuration The Configuration tab SpeedTouch™110g wireless profiles This tab allows you to configure the SpeedTouch™110g wireless settings. The wireless parameters, configured via the Wireless Client Manager are stored in profiles. By default one profile DEFAULT is configured with common default wireless settings.
Chapter 2 Wireless Client Manager Common Common allows you to configure the basic wireless parameters: The following fields are available: Security Network Name (default: “speedtouch”) Input an SSID string for the wireless network to which you want to connect. This should be set to the same value as the SSID of the access point or wireless router to which you are connected. Set this value to ANY to allow connection to any access point. This assumes that the access points are broadcasting the SSID.
Chapter 2 Wireless Client Manager Click Security OFF to enable the security function (the button changes to Security ON): The following fields are available: Authentication Type WEP (Wired Equivalent Privacy) and WPA (Wi-Fi Protected Access) are implemented in the SpeedTouch™110g to prevent unauthorized access. Authentication Mode This drop-down list box allows you to choose between following modes: Open: All wireless clients using a correct SSID and WEP key are able to authenticate.
Chapter 2 Wireless Client Manager Use Passphrase Select the Use Passphrase option to automatically generate key strings for encryption. Both SpeedTouch™110g and the access point must use Passphrase. How to set up WEP Key Type Select ASCII or Hex. Default Key Choose the key for encryption. WEP provides a basic level of security, preventing unauthorized access to the network and encrypting data transmitted between wireless clients (and the access point).
Chapter 2 Wireless Client Manager How to set up WPA Wi-Fi Protected Access is an interoperable security enhancement that strongly increases the level of data protection and access control for existing and future wireless LAN systems. It is derived from and will be forward-compatible with the upcoming IEEE 802.11i standard. WPA employs a combination of several technologies to provide an enhanced security solution for 802.
Chapter 2 Wireless Client Manager 2.2 Link Information The Link Information tab This screen displays current connection information of the SpeedTouch™110g: The following fields are available: E-DOC-CTC-20040401-0001 v3.0 Network Name (SSID) The name of the network to which the SpeedTouch™110g is currently connected with other clients on the network. Base Station Name ID The MAC address of the access point to which the SpeedTouch™110g is connected in an infrastructure network.
Chapter 2 Wireless Client Manager 2.3 IP Information The IP Information tab This screen displays your computer’s IP Information: The following fields are available: 18 IP Address Client IP address of the computer. IP Netmask Client A mask used to determine to what subnet an IP address belongs. Gateway The IP address of the Gateway. Host Name Client The computer’s name on the network. Click Release To release the current IP settings of the SpeedTouch™110g.
Chapter 2 Wireless Client Manager 2.4 Site Survey The Site Survey tab Site Survey scans and displays all wireless devices within range. You can connect to a wireless device by double-clicking on that entry: The following fields are available: E-DOC-CTC-20040401-0001 v3.0 Click Scan To scan for available network connections. Network name SSID (See Common in “2.1 Configuration” on page 12.) MAC address The MAC address of the listed wireless device.
Chapter 2 Wireless Client Manager 2.5 Version Information The Version Information tab This screen shows information on the current version of the driver and configuration utility: To upgrade the firmware, click the link to download the latest driver and utility software. 20 E-DOC-CTC-20040401-0001 v3.
Chapter 3 Troubleshooting 3 Troubleshooting Adapter Installation Problems If your computer cannot find the SpeedTouch™110g or the driver software does not install correctly, check the following: Make sure the SpeedTouch™110g is securely seated in the Cardbus slot. Check for any hardware problems, such as physical damage to the cardbus connector. Try the SpeedTouch™110g in another Cardbus slot. If this also fails, test your computer with another wireless card that is known to operate correctly.
Chapter 3 Troubleshooting 22 E-DOC-CTC-20040401-0001 v3.
© THOMSON 2004. All rights reserved. E-DOC-CTC-20040401-0001 v3.0 Need more help? Additional help is available online at www.speedtouch.
