User Guide

STUSB hardware
installation
3 Speed Touch USB for MAC OS
31 / 48
3EC 36714 AAAA TCZZA Ed. 02
10. At the end of the installation procedure, the following screen
appears:
Click to finish the installer.
1. Plug the ADSL cable, provided in your package, into the inline
receptacle of the STUSB. Plug the other end of the ADSL cable into
the wall socket terminating ADSL service.
Note: Depending onto which pins of the wall socket the ADSL
signals are assigned, it might be necessary to plug in an RJ11
interchanger into the wall socket prior to connect the ADSL cable.
2. Plug the STUSB's USB connector into the computer's USB port.
An USB port can be easily located, it is marked with the typical USB
symbol: