User Guide

Destination networks

subnet values

Address translation

()

Primary and secondar

DNS server

9 Configuration and Use - PPP & IP Routing

93 / 238

3EC 17059 ABAA TCZZA Ed. 01

The following table lists the used netmasks, related to the four

possible options:

Connection Sharing value Related Source Subnet Mask Notation

All Networks 0.0.0.0 /0

Remote net only 255.255.255.0 /0

Remote host only 255.255.255.255 /32

Specific network

defined below

255.255.255.0.0 (default)

This value is depending on the

destination Subnet Mask.

You can apply Network Address and Port Translation (NA(P)T) on

the (negotiated) PPP IP address. Per default NA(P)T are enabled.

Via this checkbox it is possible to check/uncheck the NA(P)T flag

().

See section 12.6 for more information.

These fields allow - optionally - to enter the IP address(es) of the

primary, and optionally the secondary, DNS server(s). If you supply

these IP addresses, the STPro will negotiate these addresses with

the remote side of the PPP connection. If these fields are left blank,

the remote side will supply the IP addresses of the primary and

secondary DNS servers.

See chapter 13 for more information.