User Guide

Introduction
In this chapter
18 Maintenance - Speed Touch CLI
201 / 238
3EC 17059 ABAA TCZZA Ed. 01
18 Maintenance - Speed Touch CLI
For advanced configurations, with full control over all the STPro
functions, the STPro exhibits a character based interface, i.e. the
Command Line Interface (CLI).
As the CLI has far more configurational possibilities than the
regular STPro pages, it is intended for experienced users only.
The CLI is accessible via:
 A Telnet session via Ethernet IP connectivity
 The serial 'Console' port.
Topic See
Native CLI Access 18.1