User Guide

Procedure
BrowsetoDefaults
result
16 Maintenance - Speed Touch ToDefaults
190 / 238
3EC 17059 ABAA TCZZA Ed. 01
16.2.1 BrowsetoDefaults
Proceed as follows:
1. Click
on the STPro pages to pop up the
'System setup' page (See section 17.2 for more information):
2. Click if you are sure to reset the STPro to its
original defaults.
3. The STPro will ask to confirm the reset:
4. Click if you are sure. Otherwise click .
5. Click
to make the BrowsetoDefaults permanent.
6. Press the reload button of your Web browser.
After reset, all original configurations of the STPro are restored,
except the STPro Ethernet IP address(es).