User Guide
PPPoA configuration
Opening a session
Credentials
10 Configuration and Use - Relayed PPPoA
87 / 288
3EC 36231 ABAA TCZZA Ed. 01
10.2.2 Using PPTP towards your STPro
Per default, following PPPoA phonebook entries are available for
Relayed PPPoA connections:
RELAY_PPP1 (PPPoA on 8.48)
RELAY_PPP2 (PPPoA on 8.49)
RELAY_PPP3 (PPPoA on 8.50)
RELAY_PPP4 (PPPoA on 8.51)
DIALUP_PPP3 (PPPoA on 8.66)
In case these PPPoA phonebook entries do not meet your
requirements, you can configure a new one.
See section 13.3 for more information.
Depending on your OS, you can open a session by either double
clicking the PPTP session icon or selecting it from a RAS table and
clicking 'DialUp' or 'Connect'.
Before you can actually browse the Internet or contact the remote
side's resources, you must supply the following credentials:
A username
An associated password.
Note: Most, if not all OSs allow the credentials to be saved.