User Guide

Needed information
Multiple destination
PC(s)
TCP/IP
10 Configuration and Use - Relayed PPPoA
84 / 288
3EC 36231 ABAA TCZZA Ed. 01
10.1 Preparatory Steps
 VPI/VCI value of the VC(s) to use on the DSL line
 PPPoA (RFC2364) connection service must be supported on
this VC
 Encapsulation method (VCMUX)
 Remote access server must be a PPP(oA) server
 Username and password for your user account.
The STPro can manage up to 12 Relayed PPPoA connections
simultaneously.
Note: Check with your SP or corporate whether multiple endtoend connectivity
is enabled.
Your PC must support PointtoPoint Protocol (PPP) and
PointtoPoint Tunnelling Protocol (PPTP).
Note: All Microsoft Windows and Mac platforms support PPP and PPTP.
A PPTP DialUp application must be installed on your PC.
Note: All Microsoft Windows and Mac platforms have a PPTP DialUp
application installed per default.
Before you can establish PPTP tunnels, you must configure:
 A local IP address in each PC which initiates a PPTP tunnel
 A local IP address in the STPro which terminates the PPTP
tunnel(s).
See chapter 14 for more information on IP.