User Guide

Introduction
The 'Detailed
Configuration' table
Interaction with the
STPro IP router
In this section
9 Configuration and Use - Routed PPPoE
77 / 288
3EC 36231 ABAA TCZZA Ed. 01
9.4 Detailed Configuration
Additional configuration of the Routed PPPoE entry may be needed
in the 'Detailed Configuration' table.
This section describes the various PPPoE connection configurations
the STPro offers for assuring endtoend connectivity.
On the 'PPP' page a 'Detailed Configuration' table can be found.
The contents of this table are always related to the highlighted
entry in the 'PPP Configuration' table.
The 'Detailed Configuration' table contains three or four tabs.
Three tabs, 'PPPoE', 'Routing' and 'Other' allow you to overview
or configure connection related settings for the Routed PPPoE
entry. The fourth tab 'Stats' appears only if a session is running on
the selected Routed PPPoE entry.
After configuration of these detailed Routed PPPoE entry aspects,
press
and to apply and save your changes.
Most of the configurations described in this section, influence the
IP router in the STPro.
See chapter 14 for more information on IP routing aspects.
Topic See
'PPPoE' Configurations 9.4.1
'Routing' Configurations 9.4.2
'Other' Configurations 9.4.3
'Stats' During a Routed PPPoE Session 9.4.4