User Guide
Routed Ethernet
configuration
Using Routed Ethernet
7 Configuration and Use - Routed Ethernet
63 / 288
3EC 36231 ABAA TCZZA Ed. 01
7.2 Using Routed Ethernet
There are no default Routed Ethernet entries.
Therefore, configure an appropriate entry as follows:
1. If needed, add an ETHoA phonebook entry with the correct
VPI/VCI on the 'Phonebook' page.
2. On the 'MER' page, select this phonebook entry from the
'Address' popdown list.
3. For this entry, select the correct encapsulation method from
the 'Encapsulation' popdown list.
4. DHCP is per default on (). If needed, uncheck it and enter IP
information manually.
5. Click
.
See section 7.3 for more information.
Make sure your STPro is turned on first.
Turn on your PC(s), start your Web browser and you are on the
Internet or have Corporate Intranet access.
Although the access method of Routed Ethernet is 'Alwayson' the
remote organization might ask for a username and password.