User Guide
The 'Aging' bo
x
Adding entries
Deleting entries
6 Configuration and Use - Transparent Bridging
58 / 288
3EC 36231 ABAA TCZZA Ed. 01
The following figure shows the 'Aging' box:
It indicates the aging timer of the bridge internal database.
If the aging time of a MAC entry has expired this entry will be
removed from the database.
Only in exceptional cases the default value of 300 seconds (5
minutes) needs to be modified. The allowed range is from 10
seconds to 12 days.
Proceed as follows:
1. Browse to the 'Bridge' page.
2. If needed, click .
3. Select the phonebook entry from the 'Address' popdown list.
Note: In case the presented phonebook entries do not suite your desired
configuration, you must firstly create a correct phonebook entry. See
section 13.3 for more information.
4. Select the encapsulation method for the Bridging port from
the 'Encapsulation' popdown list (per default set to
LLC/SNAP).
5. Optionally, enter a name for the Bridge interface in the
'Interface' field.
6. Click and to finish the procedure.
On the 'Bridge' page, click next to the Bridging entry you
want to delete. As a result your selection is highlighted.
Click
and .