User Guide
Bridging configuration
Using Bridging
6 Configuration and Use - Transparent Bridging
55 / 288
3EC 36231 ABAA TCZZA Ed. 01
6.2 Using Bridging
There are no default Bridging entries.
Therefore, configure an appropriate entry as follows:
1. If needed, add an ETHoA phonebook entry with the correct
VPI/VCI on the 'Phonebook' page.
2. On the 'Bridge' page, select this phonebook entry from the
'Address' popdown list.
3. For this entry, select the correct encapsulation method from
the 'Encapsulation' popdown list.
4. Click
.
See section 6.3 for more information.
Make sure your STPro is turned on first.
Turn on your PC(s), start your Web browser and you are on the
Internet or have Corporate Intranet access.
Although the access method of the bridge is 'Alwayson', the
remote organization might ask for a user name and password.