User Guide

Turning on/off the
STPro
POST phases
Checking link integrit
y
AppendixB Speed Touch Specifications
267 / 288
3EC 36231 ABAA TCZZA Ed. 01
B.2 Power On/Off Behavior
You can turn the STPro on (I) or off (O) with the power switch.
As soon your STPro is turned on, you can check the PWR/Alarm"
LED (See section B.1) to see how the startup progresses.
Phase PWR/Alarm" LED Indication Description
1 Flashing red POST pending
2 Solid amber Startup failed
2 Solid red POST failed
2 Solid green Normal operation
Your STPro is ready for
service.
If the LAN devices which are directly connected to the STPro's
Ethernet port(s) are powered on, the link integrity/activity LED of
the particular port lights up green (See section B.3).