User Guide

Introduction
General CLI
information
CLI help
Navigating through CLI
levels
22 Maintenance - Speed Touch CLI
255 / 288
3EC 36231 ABAA TCZZA Ed. 01
22.2.3 CLI Command Basics
Although it is not the aim of this subsection to give a complete
overview of all possible configurational STPro items, this
subsection describes some of the generalities of the native CLI
environment.
Once you accessed your STPro, you will get the CLI prompt: =>.
From this point you can start entering your commands.
The CLI access is structured in what is called levels".
The => prompt indicates that you are in the root" level of CLI.
Typing help at the root prompt shows you the available
command groups:
=>help
Following commands are available :
help : Displays this help information
exit : Exits group selection.
.. : Exits group selection.
Following command groups are available :
dhcp dns td atmf mer
bridge pptp ppp cip nat
adsl/shdsl qosbook phonebook ip software
system config firewall
=>
Note: For the ADSL STPro variants the adsl command group is present, for
the SHDSL ASTPro variant the shdsl command group applies.
Entering the name of a command group, accesses you to this
specific level.
For example , entering =>config followed by pressing 'Enter',
brings you to the config" level. This is indicated by its own
prompt:
[config]=>