User Guide

Advantages of the CLI

via serial access

Serial access

requirements

Serial connection

settings

Accessing the CLI

22 Maintenance - Speed Touch CLI

254 / 288

3EC 36231 ABAA TCZZA Ed. 01

22.2.2 CLI via Serial Access

The CLI via serial access:

 Provides CLI command connectivity to the STPro, without the

need of a TCP/IP configuration

 Allows remote STPro configuration via an intermediate POTS

modem or ISDN modem/router.

For serial access, you need:

 A serial cable.

 An ASCII terminal (VT100) or a PC with ASCII terminal

emulation, for local configuration

 A POTS or ISDN modem/router for remote configuration.

Setup the serial interface of your ASCII terminal or PC for:

 9600 BAUD

 8 databits

 no parity, 1 stopbit.

As soon the connection is made, your terminal is ready for the

CLI.

Just press 'Enter' to pop up the CLI command prompt : =>