User Guide

Procedure
Result
21 Maintenance - Speed Touch Web Interface
243 / 288
3EC 36231 ABAA TCZZA Ed. 01
21.2 Browsing to the Speed Touch Pages
Proceed as follows:
1. Start the Web browser on your PC or workstation.
2. Contact the STPro by entering one of the following:
 The STPro IP address (default 10.0.0.138)
 The STPro DNS hostname (default SpeedTouch.lan).
3. If a system password was set (See chapter 19 for more
information), an authentication window will pop up.
Enter the system password in the 'Password' field.
As a result the 'Welcome to the World of DSL' page pops up:
From now on the STPro acts as a Web server sending HTML
pages/forms at your request. You can fill out these pages/forms
and submit them to the STPro. The latter scans the pages and
makes configurations accordingly.