User Guide

Procedure
BrowsetoDefaults
result
20 Maintenance - Speed Touch ToDefaults
236 / 288
3EC 36231 ABAA TCZZA Ed. 01
20.2.1 BrowsetoDefaults
Proceed as follows:
1. Click
on the STPro pages (See section 21.2
for more information).
2. On the 'System setup' page the following table is shown:
3. Click if you are sure to reset the STPro to its
original defaults.
4. The STPro will ask to confirm the reset:
5. Click if you are sure. Otherwise click .
6. Click
to make the BrowsetoDefaults permanent.
7. Press the reload button of your Web browser.
After reset, all original configurations of the STPro are restored
except the STPro Ethernet IP address(es).